• WSM220LM
  • WSM220LM
  • 220L 34mm Quick Detach Low Rings

    Select Color

    34mm
    Where to buy

    Product Description

    The Maxima QD Rings sport the unique Warne indexable lever system which allows the user to remove the optics from the rifle then reattach it without the loss of zero, as well as allowing the location of the lever to be indexed once the rings are affixed to the bases. After the levers are tightened, simply pull out on the lever, turn it to the desired location then let it snap into place.
    When used on the all steel Warne Maxima Bases, we guarantee return to zero accuracy when removing and reattaching the optic. Also unique to the industry, the Maxima QD Rings have a square stainless steel recoil control key. This ensures a positive recoil engagement surface across the entire face of the recoil slot in the base. The recoil control key guarantees that the rings will not shift or move under fierce recoil and also protects against peening or swaging when mounted on aluminum bases.
    The finished rings are assembled with four quality Torx style T-15 socket cap screws for strength and durability.

    • Return to Zero Guaranteed, quickly detach and reattach the Maxima QD rings with no loss of zero.
    • Square recoil control key for positive engagement of ring to base.
    • Indexable lever allows placement of the levers in any position desired.
    • Rings securely mount around scope using 4 Torx style T-15 socket cap screws, 25 in/lb. of torque recommended.
    PDF Download
    Remove the 4 screws from both rings. Place the scope in the ring halves and re-insert recoil key. Start all 4 screws on both rings and tighten bottom screws to 25 in/lb* max. Place rings onto the bases with the recoil keys in the slots. Push each ring towards the muzzle to seat the recoil key and tighten QD lever, thumb & forefinger tight. (there is no need to over tighten QD lever) Adjust eye relief and level the reticle. Once both are correct, tighten the top screws on both rings to 25 in/lb* max.
    *After tightening, pull QD levers out to index them to the desired position.