7818M 1 PC Precision Cantilever Mount, 30mm MSR

$314.99
SKU:
7818M
  • Ideal Height for Gas Guns.
  • 2 Integral Recoil lugs.
  • Generous 2 inch cantilever.
Current Stock:

Out of stock

Key Features:
Best Uses:

Description

10 Accessory Mounting Locations.
Designed and MADE IN USA

The Warne® Skyline® Precision Cantilever Mount for 30mm scope tube in black was engineered with the precision rifle shooter/competitor in mind. Machined from 7075 T6 aluminum billet, and featuring 2 integral recoil lugs along with 4 mounting crossbolts, the precision engineer mount torture and competition tested to withstand hard use environments while being at the ideal 1.54” height Chassis bolt rifles and for AR15 and AR10/SR25/LR308 type receivers.

A generous 2” cantilever provides optimal eye relief for moden scopes and low power variable optics. The STANAG rail interface allows for more precise mount alignment and return to zero capability than a traditional Mil Spec 1913 Picatinny interface as well as being compatible with all picatinny rails.

The Warne Skyline Precision Cantilever Mount features a wide assortment of accessories that mount directly to 10 different locations on the scope rings. Look for Warne’s complete line of Skyline Precision Shooting Accessories at your favorite retailer.

  • Available in Zero & 20MOA for 30mm, 34mm and 35mm scopes.
  • Designed and MADE IN USA

Be sure to check out these scope mount attachable accessories that allow the scope tube to be free and easily moved front to back for precise eye relief and is a much more efficient way to mount accessories:

  • Precision Mount Level
  • Data Card Holder
  • 0° accessory rail
  • 90° accessory rail
  • Data Card Refills

Designed for long-range precision competition chassis rifles but are also a pefect compliment for a long Rang AR15 or AR10 style rifle 

Specifications

Part Number:
7818M
Fits Objective Size:
72mm
Height:
MSR Ideal Height
Dimension A:
30mm
Dimension B:
1.540 inch
Dimension C:
.813 inch
Dimension D:
3.23 inch
Finish Color:
Matte Black
Weight:
6.4 oz
Material:
7075 Aluminum
Scope Tube Diameter:
30mm
Fits Objective Up To:
MSR Ideal Height

Installation Instructions

Always verify that your firearm is UN-LOADED before performing any service on it. Warne recommends that you loosely assemble rings and scope onto firearm prior to final mounting to verify eye relief and ring spacing.
  • Loosen 4 cross bolts with a T-20 wrench and install on your picatinny style rail.
  • Tighten cross bolts snug and follow the recommended pattern for final tightening.
  • Warne recommends torquing the cross bolts in the order of 2, 3, 1, 4 to 40 in/lb max.

  • Remove the 4 cap screws from each top cap with the supplied T-15 wrench and remove the top caps.
  • Place your scope in the mount and replace the top caps and screws*.
  • Slowly tighten cap screws evenly and leave loose enough to adjust for eye relief and level the reticle and tighten the cap screws in a criss-cross pattern to scope manufacturers’ recommended torque rating**, 18 in/lb maximum.

*Torque Spec are for dry threads, DO NOT USE THREAD-LOCKER COMPOUND

**Many scope manufacturers’ have established specific torque ratings for their scope and you must follow their recommended torque.

IMPORTANT: NEVER OVER TIGHTEN ANY BASE OR RING SCREW. NEVER ATTACH A SCOPE IF THE OBJECTIVE TOUCHES THE BARREL OR CAUSES INTERFERENCE WITH THE BOLT, SAFETY OR CYCLING OF THE ACTION. ALWAYS FOLLOW THE FIREARM OR SCOPE MANUFACTURERS’ RECOMMENDED TORQUE SPECIFICATIONS. YOU ARE RESPONSIBLE FOR YOUR OWN GUNSMITHING METHODS.

If you are unsure or do not have the proper tools, please contact a gunsmith for assistance, Warne will not be held liable for stripped/damaged receivers or scopes.