7214M Warne Mountain Tech 30mm, Medium Matte Rings

$158.99
SKU:
7214M
  • Lightweight.
  • Mil-Spec Hardcoat.
  • Stainless Steel Hardware.
Current Stock:

Out of stock

Key Features:
Best Uses:

Description

Available in 1, 30mm,34mm, 35mm and 40mm size.
Designed and MADE IN USA

Warne Mountain Tech rings from Warne Scope Mounts are built for long-lasting service and dependability.

Some shooting enthusiasts enjoy sticking to the range, while others enjoy hunting from a stand or blind. Then there are the back country hunters, the ones who take on an extra level of sporting to their hunt. Truly out in the field, these hunters choose their equipment carefully in order to better track their target. These hunters usually opt for a lightweight scope or other compact scope of some sort, following the old credo "Ounces are pounds, pounds are pain."

Our Mountain Tech line of scope rings were designed with those adventurers in mind. We engineered Warne Mountain Tech as a lightweight and rugged scope ring design that is equally at home on a mountain rifle or precision target rifle. Featuring 7075 aluminum construction and stainless hardware, they withstand the punishing conditions found in any chosen environment.

These Mountain Tech 7214M 30mm scope rings feature a medium height, good for handling a lightweight rifle scope with an objective as large as 42mm. At .705 inches wide, the bands offer extra grip of the scope barrel, ensuring that you'll stay on target shot after shot, or after accidentally bumping a branch. The precision CNC 7075 aluminum and stainless steel hardware give them all-weather toughness, and the hardcoat anodized finish staves off environmental damage.

  • Precision CNC machined from 7075/T6 aluminum for a high strength & lightweight platform
  • Mil-Spec hardcoat anodized finish for abrasion and corrosion resistance.
  • Rings feature stainless steel hardware for "Element Proof" protection.
  • Mil-Spec 65 in/lb., 1/2" tactical nut attachments for securely clamping to the rail.
  • Fits Picatinny & Weaver style mounts and are NATO-STANAG compatible.
  • Available for 1", 30mm, 34mm, 35mm and 40mm tube sizes; in Low, Medium, High and MSR ideal height; For maximum compatibility with most scope/firearm combinations.

Specifications

Part Number:
7214M
Fits Objective Size:
42mm
Height:
Medium
Dimension A:
30mm
Dimension B:
0.400 inch
Dimension C:
0.705 inch
Finish Color:
Matte Black
Weight:
3.9 oz
Material:
7075 Aluminum
Fits Objective Up To:
52mm
Scope Tube Diameter:
30mm
Fits:
Maxima/Weaver Bases and Picatinny Rails
Dimension D:
0.990 inch

Installation Instructions

Always verify that your firearm is UN-LOADED before performing any service on it. Warne recommends that you loosely assemble rings and scope onto firearm prior to final mounting to verify eye relief and ring spacing.
  • Loosen both nuts on the Mountain Tech rings and install on your Mountain Tech rail or Maxima (weaver style) bases.
  • Slide each ring forward so the recoil lug is contacting the front of the cross slot. Torque the ring nut to 65 in/lbs maximum and repeat for the other ring.
  • Remove the four cap screws from each top cap with the supplied T-15 wrench and remove top caps.
  • Place your scope in the Mountain Tech rings and replace top caps and screws*

*Torque Spec are for dry threads, DO NOT USE THREAD-LOCKER COMPOUND

**Many scope manufacturers’ have established specific torque ratings for their scope and you must follow their recommended torque.

To remove the scope, simply loosen the ½” nut and lift the scope off the mount, tilting slightly to the opposite side of the nut. To re-mount the scope, simply place the rings into the slots the scope was originally mounted in, slide the rings and scope forward until the recoil lugs contact the front of the slot, and tighten the ½” nut. NOTE: The ½” tactical nut screw assembly is pre-set at the factory and does not require any adjustments. Tampering with this screw can cause improper function of the scope rings.

IMPORTANT: NEVER OVER TIGHTEN ANY BASE OR RING SCREW. NEVER ATTACH A SCOPE IF THE OBJECTIVE TOUCHES THE BARREL OR CAUSES INTERFERENCE WITH THE BOLT, SAFETY OR CYCLING OF THE ACTION. ALWAYS FOLLOW THE FIREARM OR SCOPE MANUFACTURERS’ RECOMMENDED TORQUE SPECIFICATIONS. YOU ARE RESPONSIBLE FOR YOUR OWN GUNSMITHING METHODS.

If you are unsure or do not have the proper tools, please contact a gunsmith for assistance, Warne will not be held liable for stripped/damaged receivers or scopes.