V402M Vapor 1 inch, High Matte Rings

$31.49
SKU:
V402M
Brand:

Vapor®

  • Vertical Split.
  • Lightweight.
  • Fixed.
Current Stock:

Out of stock

Key Features:
Best Uses:

Description

Available in 1 and 30mm size.
Designed and MADE IN USA
AFFORDABLE, MADE IN USA QUALITY Our Vapor® line of mounts were developed and engineered to provide you with a strong and economical mounting solution that outperforms other mounts in their class.
  • Time-tested designs
  • Easy to install
  • Field proven performance
  • Lightweight aluminum
  • Lifetime warranty
  • Designed and Made in USA

Specifications

Part Number:
V402M
Fits Objective Size:
52mm
Height:
High
Dimension A:
1 inch
Dimension B:
0.225 inch
Dimension C:
0.600 inch
Finish Color:
Matte Black
Weight:
2.2 oz
Material:
Aluminum
Fits Objective Up To:
52mm
Scope Tube Diameter:
1 inch
Fits:
Maxima/Weaver Bases and Picatinny Rails

Installation Instructions

Always verify that your firearm is UN-LOADED before performing any service on it. Warne recommends that you loosely assemble rings and scope onto firearm prior to final mounting to verify eye relief and ring spacing.
  • Remove the screws from both rings.
  • Place the scope in the ring halves and re-insert recoil key (CZ & Ruger rings do not have specific recoil keys and utilize an integrated recoil management system)
  • Start all 4 screws on both rings and tighten only the bottom screws to 25in/lb* max.
  • Place rings onto the bases with the recoil keys in the slots and push each ring towards the muzzle to seat the recoil key
  • Adjust eye relief and level the reticle and tighten only the bottom screws to 25in/lb* max.
  • Once both are correct, tighten the top screws on both rings to scope manufacturers’ recommended torque rating**, maximum of 25 in/lb.

*Torque Spec are for dry threads, DO NOT USE THREAD-LOCKER COMPOUND

**Many scope manufacturers’ have established specific torque ratings for their scope and you must follow their recommended torque.

IMPORTANT: NEVER OVER TIGHTEN ANY BASE OR RING SCREW. NEVER ATTACH A SCOPE IF THE OBJECTIVE TOUCHES THE BARREL OR CAUSES INTERFERENCE WITH THE BOLT, SAFETY OR CYCLING OF THE ACTION. ALWAYS FOLLOW THE FIREARM OR SCOPE MANUFACTURERS’ RECOMMENDED TORQUE SPECIFICATIONS. YOU ARE RESPONSIBLE FOR YOUR OWN GUNSMITHING METHODS.

If you are unsure or do not have the proper tools, please contact a gunsmith for assistance, Warne will not be held liable for stripped/damaged receivers or scopes.