7914M Lite Bipod, QD M-LOK Interface
MSRP:
$249.99
Was:
$249.99
Now:
$212.99
(You save
$37.00
)
- SKU:
- 7914M
- Brand:
-
Skyline®
- Shipping:
- Coming Soon
- Adustable from shooting position
- Rapid Leg Deployment
- 13 adjustable height increments
Key Features:
Best Uses:
Description
M-LOK interface
Designed and MADE IN USA
The next level of strength and versatility, the Warne® Skyline® Lite Bipod with M-LOK head is rugged and adaptable to suit any shooting endeavor. Quick Disconnect buttons make it fast to install when you need it and fast to remove when you don't. Machined from aircraft-grade aluminum, our Skyline Lite was engineered to be an extremely stable, yet lightweight platform, packed with essential features to complement rapid-fire and precision-shooting alike. The Skyline Lite Bipod allows for an impressive 4.65 inches of height adjustment and 44° of smooth cant range that is easily manipulated and locked out without coming off target.
BODY
• Quick-Detach M-LOK Interface
• A.R.M.S.® 17S universal head interface accepts multiple mounting
configurations
• Reversible head
• 44° of total cant range
• Cant tension lever
• One-handed adjustability
LEGS
• Rapid leg deployment from horizontal
• 3 additional leg positions at 0°, 45°, and 90°
• 13 height adjustment increments
• Minimum height: 6.5”
• Maximum height: 11.15”
• 13” extended footprint
• Accepts Atlas®-style feet, except 5H or Supercal sized
Does not accept Warne Skyline Bipod feet or leg extensions.
Made in the USA
Perfect for use with PRS, NRL, Long-Range Hunting, 3-gun/multi-gun and at the gun range.
Warne is a Proud Sponsor of the Precision Rifle Series
Specifications
- Part Number:
- 7914M
- Finish Color:
- Matte Black
- Weight:
- 16 oz
- Material:
- 7075 Aluminum
- Fits:
- M-LOK
Related Products
Installation Instructions
Always verify that your firearm is UN-LOADED before performing any service on it. Warne recommends that you loosely assemble rings and scope onto firearm prior to final mounting to verify eye relief and ring spacing. ONLY ADJUST BIPOD WITH MUZZLE POINTING IN A SAFE DIRECTION, DOWN RANGE
- ONLY INSTALL OR ADJUST BIPOD WITH MUZZLE POINTING IN A SAFE DIRECTION, DOWN RANGE.
- The QD bipod head may be reversed or installed by removing the two allen* screws in the top of the head.
- Place the head on the top of your bipod, replace the screws and torque to 25 in-lbs. *Requires 1/8” allen head bit/wrench, not included.
- While depressing the two buttons on opposite ends of the bipod head, insert the QD M-LOK legs into the M-LOK slots ensuring the bipod head fully seats.
- Release the opposing buttons to engage M-LOK slots. Ensure the mount is flush and feels secure on the rail.
- Rapid Deploy legs can easily lock at 90° from a resting position by pushing them down; legs can be adjusted by pressing down and holding the leg position lock and rotating to 0°, 45° or 90°, release lock and legs will lock at one of the three positions. See Figure 1
- Bipod legs may be extended by simply pulling them out to the desired length or by depressing the lock lever and sliding them out. Retract legs by depressing the lock lever and pushing legs back into their collapsed height.
- To adjust the cant tension (ease of movement), tighten or loosen the cant tension lever. See Figure 3
- To change the orientation of the quick-deploy feature, remove the cant tension lever from bipod, turn head assembly 180 degrees, and reinstall onto the leg mechanism. Ensure all washers are replaced in their original location before reinstalling the cant tension lever.
- The bipod head may be reversed or replaced by removing the two screws in the top of the head. Replace screws and torque to 25 in-lbs. Replacement heads are available in a quick-disconnect picatinny mount or an ARCA rail mount. See Figure 2
IMPORTANT: NEVER OVER TIGHTEN ANY BASE OR RING SCREW. NEVER ATTACH A SCOPE IF THE OBJECTIVE TOUCHES THE BARREL OR CAUSES INTERFERENCE WITH THE BOLT, SAFETY OR CYCLING OF THE ACTION. ALWAYS FOLLOW THE FIREARM OR SCOPE MANUFACTURERS’ RECOMMENDED TORQUE SPECIFICATIONS. YOU ARE RESPONSIBLE FOR YOUR OWN GUNSMITHING METHODS.
If you are unsure or do not have the proper tools, please contact a gunsmith for assistance, Warne will not be held liable for stripped/damaged receivers or scopes.
