Key Features:
Best Uses:
Description
Available in Zero or 20MOA.
Firearm Specific Fitment.
Designed and MADE IN USA
Count on a tactical rail from Warne Scope Mounts to offer strong, durable service on your Remington 700 model.
Shooting enthusiasts quickly learn about the value of proper alignment for sights and scopes. They also quickly learn, after their first shot, how quickly all that work for proper sighting can get discarded through improper adjustments and substandard equipment.
Remington firearms have a long history of dependable service, and modern rail systems can upgrade what Remington models offer - but only if those rails offer proper fitment and quality. At Warne Scope Mounts, we have been designing scope bases, rails and mounts that hold their grip shot after shot. We rely on custom machining superior materials at our U.S. facility to offer high-quality rails, and the M673-20MOA tactical rail is a good example.
This rail is made with strong steel, weighing in at 4.1 ounces. Set for 20 MOA, it fits the profile of Remington 700 models, as well as Bergara B-14 short actions, Christensen Arms bolt actions and others.
Warne Tactical Rails are designed around the Mil-Spec Picatinny style rail system and provide a strong and true platform for optics mounting.
- Warne Tactical Rails allow the use of Picatinny or standard Weaver style rings.
- Constructed of solid steel and machined in both standard and 20MOA configurations, matte black only.
- Cross slots feature the 1913 Mil-Spec design.
- Bases securely mount to your gun with T-15 Torx style screws, 25 in/lb. of torque recommended.
Specifications
Related Products
Installation Instructions
Always verify that your firearm is UN-LOADED before performing any service on it. Warne recommends that you loosely assemble rings and scope onto firearm prior to final mounting to verify eye relief and ring spacing.
- Visually inspect your firearm's receiver for burrs around the screw holes and remove if necessary. Remove all oil and grease from the holes in the receiver, the base screws and contact surfaces.
- Place the base(s)/rail on the receiver. In some instances the front base will overhang the receiver, place base overhang towards the rear of the firearm. Check for proper fit and alignment.
- If you have short and long screws, please use the short screws in the front of base/rail, front holes of firearm.
- Using a T-15 wrench (supplied with WARNE rings) loosely install the supplied Torx 15 screws.
- If base(s)/rail fit properly, firmly tighten screws.
- WARNE recommends no more than *25 in/lb maximum torque. WARNE recommends the use of a REMOVABLE thread locking compound on base/rail installations only, for best results.
IMPORTANT: NEVER OVER TIGHTEN ANY BASE OR RING SCREW. NEVER ATTACH A SCOPE IF THE OBJECTIVE TOUCHES THE BARREL OR CAUSES INTERFERENCE WITH THE BOLT, SAFETY OR CYCLING OF THE ACTION. ALWAYS FOLLOW THE FIREARM OR SCOPE MANUFACTURERS’ RECOMMENDED TORQUE SPECIFICATIONS. YOU ARE RESPONSIBLE FOR YOUR OWN GUNSMITHING METHODS.
If you are unsure or do not have the proper tools, please contact a gunsmith for assistance, Warne will not be held liable for stripped/damaged receivers or scopes.
