Key Features:
Best Uses:
Description
Lower 1/3 or Absolute Co-witness
Includes .180 inch spacer
Designed and MADE IN USA
The Warne® Red Dot Riser for the Aimpoint ACRO sight is designed to allow optics to sit on a higher sight plane on a firearm. Since picatinny mounted red dots can vary in height, this mount features a spacer that allows the user to select 2 different heights based on their needs. .180” thick spacer included.
- Height without spacer is 1.52 inches
- Height with the spacer is 1.70 inches
- Fits the Aimpoint ACRO interface
- Includes a .180 inch thick spacer
- Designed and MADE IN USA
Specifications
Related Products
Installation Instructions
Always verify that your firearm is UN-LOADED before performing any service on it. Warne recommends that you loosely assemble rings and scope onto firearm prior to final mounting to verify eye relief and ring spacing.
- Install optic on top plate of the mount and torque to optic manufacturer’s specification.
- Attach the top plate to the clamp with the included 4 T-10 screws on the bottom of the mount. If using the provided spacer use the longer screws, the shorter screws are for assembling the mount without the spacer.
**Many scope manufacturers’ have established specific torque ratings for their scope and you must follow their recommended torque.
IMPORTANT: NEVER OVER TIGHTEN ANY BASE OR RING SCREW. NEVER ATTACH A SCOPE IF THE OBJECTIVE TOUCHES THE BARREL OR CAUSES INTERFERENCE WITH THE BOLT, SAFETY OR CYCLING OF THE ACTION. ALWAYS FOLLOW THE FIREARM OR SCOPE MANUFACTURERS’ RECOMMENDED TORQUE SPECIFICATIONS. YOU ARE RESPONSIBLE FOR YOUR OWN GUNSMITHING METHODS.
If you are unsure or do not have the proper tools, please contact a gunsmith for assistance, Warne will not be held liable for stripped/damaged receivers or scopes.
