Key Features:
Best Uses:
Description
Lightweight Stainless Steel
Footprint Mount Sealing Plate
Designed and MADE IN USA
The Trijicon® RMR® sealing plate is designed to weatherproof the underside of the sight when used with compatible Warne® red dot mounts or risers.
Warne recommends using this sealing plate when installing Trijicon RMR optics with exposed battery area to our reflex sight mounts.
Specifications
Installation Instructions
Always verify that your firearm is UN-LOADED before performing any service on it. Warne recommends that you loosely assemble rings and scope onto firearm prior to final mounting to verify eye relief and ring spacing.
- Align the sealing plate to the underside of the Trijicon RMR.
- Install the sight and sealing plate onto any compatible Warne red dot riser or mount.
- Insert mounting screws and tighten to manufacturer's recommended torque.
**Many scope manufacturers’ have established specific torque ratings for their scope and you must follow their recommended torque.
IMPORTANT: NEVER OVER TIGHTEN ANY BASE OR RING SCREW. NEVER ATTACH A SCOPE IF THE OBJECTIVE TOUCHES THE BARREL OR CAUSES INTERFERENCE WITH THE BOLT, SAFETY OR CYCLING OF THE ACTION. ALWAYS FOLLOW THE FIREARM OR SCOPE MANUFACTURERS’ RECOMMENDED TORQUE SPECIFICATIONS. YOU ARE RESPONSIBLE FOR YOUR OWN GUNSMITHING METHODS.
If you are unsure or do not have the proper tools, please contact a gunsmith for assistance, Warne will not be held liable for stripped/damaged receivers or scopes.