7659-20MOA Kimber 8400 WSM Mountain Tech Tactical Rail, 20MOA
$74.99
- SKU:
- 7659-20MOA
- Brand:
-
Mountain Tech®
- 20MOA.
- Tapered 8-40 Screws.
Key Features:
Best Uses:
Description
Available in Zero or 20MOA.
Firearm Specific Fitment.
Designed and MADE IN USA
Warne Mountain Tech 7659M-20MOA Picatinny Rail for Kimber 8400 WSM provides the advantage of a consistent mounting platform. Picatinny rails provide multiple positions to mount a scope to get proper eye relief and superior alignment of scope rings.
Furthermore, the 20MOA incline inherent to the rail expands the scope's elevation adjustment range, enabling shooters to compensate effectively for bullet drop and engage targets at extreme distances with confidence and precision.
The 7659M-20MOA is the ultimate in lightweight and durable long-range precision scope bases. When every ounce matters, and every shot counts, Warne Mountain Tech are the scope mounts you can depend on. Confidence in every shot.
Equip your long-range Kimber 8400WSM with a Mountain Tech 7659M-20MOA Picatinny rail from Warne Scope Mounts.
- Precision CNC machined from 7075/T6 aluminum for a high strength & lightweight platform
- Mil-Spec hardcoat anodized finish for abrasion and corrosion resistance.
- Bases feature black zinc coated hardware for “Element Proof” protection.
- Self centering tapered T-15 Torx screws.
- Fits Picatinny & we'ver style mounts and are NATO-STANAG compatible.
Specifications
Related Products
Installation Instructions
Always verify that your firearm is UN-LOADED before performing any service on it. Warne recommends that you loosely assemble rings and scope onto firearm prior to final mounting to verify eye relief and ring spacing.
- Visually inspect your firearm's receiver for burrs around the screw holes and remove if necessary. Remove all oil and grease from the holes in the receiver, the base screws and contact surfaces.
- Place the base(s)/rail on the receiver. In some instances the front base will overhang the receiver, place base overhang towards the rear of the firearm. Check for proper fit and alignment.
- If you have short and long screws, please use the short screws in the front of base/rail, front holes of firearm.
- Using a T-15 wrench (supplied with WARNE rings) loosely install the supplied Torx 15 screws.
- If base(s)/rail fit properly, firmly tighten screws.
- WARNE recommends no more than *25 in/lb maximum torque. WARNE recommends the use of a REMOVABLE thread locking compound on base/rail installations only, for best results.
IMPORTANT: NEVER OVER TIGHTEN ANY BASE OR RING SCREW. NEVER ATTACH A SCOPE IF THE OBJECTIVE TOUCHES THE BARREL OR CAUSES INTERFERENCE WITH THE BOLT, SAFETY OR CYCLING OF THE ACTION. ALWAYS FOLLOW THE FIREARM OR SCOPE MANUFACTURERS’ RECOMMENDED TORQUE SPECIFICATIONS. YOU ARE RESPONSIBLE FOR YOUR OWN GUNSMITHING METHODS.
If you are unsure or do not have the proper tools, please contact a gunsmith for assistance, Warne will not be held liable for stripped/damaged receivers or scopes.
