• WSM314LM
  • WSM314LM
  • 314L 30mm 3/8th inch/11mm Dovetail Quick Detach Medium Rings

    Select Color

    Where to buy Out of stock


    The Rimfire rings are designed to fit a very wide selection of rifles with either a 3/8″” or 11mm dovetail. This is made possible by using a solid asymmetrical reversible clamp that can be flipped 180? and used on wider or narrower dovetails for the best fit.

      • All steel, vertically spilt design that resembles the Maxima line of Rings.
      • Return to Zero Guaranteed, quickly detach and reattach the Rimfire QD rings with no loss of zero.
      • Assymetrical reversible side clamp fits a 3/8″ or 11mm dovetail.
      • Removable recoil key for the option to fit multiple firearm models.

    Securely mounts to firearm with Torx style T-15 socket cap screws, 25 in/lb. of torque recommended.

    PDF Download
    Remove the 4 screws from both rings. Place the scope in the ring halves and re-insert recoil key. Start all 4 screws on both rings and tighten bottom screws to 25 in/lb* max. Place rings onto the bases with the recoil keys in the slots#. Push each ring towards the muzzle to seat the recoil key and tighten QD lever, thumb & forefinger tight. (there is no need to over tighten QD lever) Adjust eye relief and level the reticle. Once both are correct, tighten the top screws on both rings to 25 in/lb* max. *After tightening, pull QD levers out to index them to the desired position. #Rings are factory set for 3/8" dovetail (dimple up), for 11mm dovetails, remove clamp and re-install with the dimple down.