Key Features:
Best Uses:
Description
Lightweight Aluminum.
Includes lower 1/3rd spacer.
Designed and MADE IN USA
The Warne Aimpoint T1 modular mount was designed to offer easy height adjustments between absolute and lower 1/3 co-witness in one package to fit all T1/T2 interface red dot optics. All riser mounts that we offer share a robust mounting base, while the top is engineered specifically for different red dot styles.
- Height w/o insert Absolute Co-Witness
- Height w/insert lower 1/3rd Co-Witness
- T1-T2 type interface
- Fits the T1-T2, H1-H2, Crossfire, Romeo 5 Red Dot and Holosun 403, 503, 515, 530
- All risers include a .180” thick spacer
- Designed and MADE IN USA
Specifications
Related Products
Installation Instructions
Always verify that your firearm is UN-LOADED before performing any service on it. Warne recommends that you loosely assemble rings and scope onto firearm prior to final mounting to verify eye relief and ring spacing.
- Assemble base, mount and sight with supplied T-10 screws.
- Starting on the underside of the base insert supplied T-10* screws up through the bottom & loosely tighten all 4 screws and continue to tighten to a max of 10 in/lb
*Use longer screws with spacer plate, shorter screws w/o spacer
**Many scope manufacturers’ have established specific torque ratings for their scope and you must follow their recommended torque.
IMPORTANT: NEVER OVER TIGHTEN ANY BASE OR RING SCREW. NEVER ATTACH A SCOPE IF THE OBJECTIVE TOUCHES THE BARREL OR CAUSES INTERFERENCE WITH THE BOLT, SAFETY OR CYCLING OF THE ACTION. ALWAYS FOLLOW THE FIREARM OR SCOPE MANUFACTURERS’ RECOMMENDED TORQUE SPECIFICATIONS. YOU ARE RESPONSIBLE FOR YOUR OWN GUNSMITHING METHODS.
If you are unsure or do not have the proper tools, please contact a gunsmith for assistance, Warne will not be held liable for stripped/damaged receivers or scopes.
