XSKEL34DE Gen 2, Extended Skeletonized 34mm MSR Mount, Dark Earth
$189.99
- SKU:
- XSKEL34DE
- Brand:
-
Tactical
- MSR Ideal Height.
- Over 2 inches of forward Cantilever.
- Steel Threaded Inserts for Cap Screws.
Key Features:
Best Uses:
Description
Available in 30mm and 34mm size.
Designed and MADE IN USA
Dark Earth XSKEL34DE Gen 2 tactical 1-piece cantilever mount tailor-made for AR15 or AR10 platforms in Dark Earth color. In the realm of 3-gun and multi-gun competitions, the XSKEL34DE harnesses these benefits while offering both form and function. Fits scopes with 34mm tubes.
Engineered with meticulous precision, the XSKEL34DE optimally situates your optic at the ideal height and forward position on your AR platform. Boasting a skeletonized design, complemented by robust steel hardware and threaded steel inserts, it provides a lightweight and yet stronger than it needs to be performance. This Gen II Edition of the XSKEL34DE Mount comes fully equipped with all the essential features for superior tactical performance.
With a 2-inch forward cantilever, the XSKEL34DE Mount perfectly suits LPVOs (Low-Power Variable Optics) and variable scopes with a 24-56mm objective, enhancing your tactical capabilities. Its 1 piece design ensures additional strength and steadfastness, even in the most demanding tactical scenarios.
Warne has engineered the XSKEL34DE to provide tactical advantages where they matter most, making it the go-to choice for competitive shooters and tactical enthusiasts. Whether engaged in 3-gun competitions or preparing for tactical operations, rely on the XSKEL34DE Mount to deliver unparalleled performance and steadfast reliability.
Scope Mount fits: AR-15, M-4, SR-25, LR308, PTR-91, and any other MSR with a Picatinny rail that is at least 3 inches long.
Specifications
Related Products
Installation Instructions
Always verify that your firearm is UN-LOADED before performing any service on it. Warne recommends that you loosely assemble rings and scope onto firearm prior to final mounting to verify eye relief and ring spacing.
- Loosen both nuts on the mount and install on your Picatinny style rail with the cantilever forward
- Warne recommends mounting the 1 piece with the front cross bolt in the farthest forward slot on AR15 Flat Tops.
- Push the mount towards the muzzle and tighten both hex nuts to 65 in/lb maximum.
- Remove the four cap screws from each top cap with the supplied T-15 wrench and remove the top caps.
- Place scope in rings and reinstall cap screws*, leave loose.
- Adjust scope position for eye relief and level reticle.
- Tighten the cap screws in a criss-cross pattern to scope manufacturers’ recommended torque rating**, 25 in/lb maximum.
*Torque Spec are for dry threads, DO NOT USE THREAD-LOCKER COMPOUND
**Many scope manufacturers’ have established specific torque ratings for their scope and you must follow their recommended torque.
IMPORTANT: NEVER OVER TIGHTEN ANY BASE OR RING SCREW. NEVER ATTACH A SCOPE IF THE OBJECTIVE TOUCHES THE BARREL OR CAUSES INTERFERENCE WITH THE BOLT, SAFETY OR CYCLING OF THE ACTION. ALWAYS FOLLOW THE FIREARM OR SCOPE MANUFACTURERS’ RECOMMENDED TORQUE SPECIFICATIONS. YOU ARE RESPONSIBLE FOR YOUR OWN GUNSMITHING METHODS.
If you are unsure or do not have the proper tools, please contact a gunsmith for assistance, Warne will not be held liable for stripped/damaged receivers or scopes.
